Compact Chiller / Heat Pump
Complete Indirect Cooling System with less than 7lbs of the refrigerant!
25kW of cooling capacity
All kind of refrigerants can be used!
R134 – R404 – R407
Standard refrigerant: R134a
Modular system - Installation in Sweden: 48 pieces CCC units are used for air conditioning. Total cooling capacity of 1,52 MW produces with only 313 lbs of refrigerant.
Low maintenance cost - Refrigerant 6.5 lbs, no
Simple installation - water/brine side and
Flexible - Refrigeration temperature from -10°C to +10°C, and the heating side from +10°C to +50°C
Safe - Less connections/less refrigerant. Minimum risk for leakage - Saving on the refrigerant -(6.5 lbs – in the past up to 33 lbs with receiver was required)
Multichannel – Combined Evaporator and Condenser – Brazed Heat Exchanger
The exchanger is a combined evaporator, condenser and superheater/subcooler. It contains 4 different channels; condenser- (refrigerant), Evaporator- (refrigerant), Water(condenser), and Brine/water (evaporator), in one and the same unit.The heat exchanger needs an injector installed after the expansion valve to recycle the oil from the bottom of the evaporator. The plates are made of stainless steel, copper 99.9% is used as soldering material.
Driver and e.e. Valve
Due to the electronic expansion valve built in super heater in the heat exchanger the unit can work within a wide range of temperatures, no changes in drive or other components needed!Refrigeration temperature from -10°C to +10°C, and the heating side from +10°C to +50°C
Power Source: 3PH 50Hz 380-415V
Suction Gas: Superheat(K) 11,1
Sub Cooling: (K) 8.3
Compressor Cooling: Natural Cooling
Refrigerant: Type Requested
Controls – Pressure Control
Dimensions: 27.5 x 27.5 x 15.75 in (H x L x W)
Technical info: 3Ph – 380V – 50Hz – 25A
• Cost Efficient
• Simple & Flexible